SEE BELOW FOR DESCRIPTION

S010360 M40 DOUBLE DECAL HELMET. (Stahlhelm M40)

BACKGROUND: The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, in the spring of 1916. These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935. In an effort to reduced construction time and labor costs minor modifications were introduced in March 1940 resulting in the M40 helmet. Further construction modifications were undertaken in August 1942 resulting in the M42 helmet. The Allgemeine-SS, (General-SS), the SS-VT, SS-Verfügungstruppe, (SS-Special Purpose Troops), the SS-TV, SS-Totenkopfverbände, (SS-Death’s Head Units) and eventually the Waffen-SS, (Armed-SS), were also allocated quantities of the assorted models of helmets through-out the war. Originally SS personnel didn’t utilized any helmet insignia until the first pattern runic SS helmet decals with silver runes on a black field were introduced on February 23RD 1934, but were only worn for a short time by SS-VT personnel. On August 12TH 1935 the black runic SS helmet decal on a silver shield shaped base and the NSDAP, Nationalsozialistische Deutsche Arbeiterpartei, (National Socialist German Worker’s Party), party shield decal were both introduced for wear by all SS personnel. Regulations of March 21ST 1940 dictated that the NSDAP party shield decal was to be removed from all helmets and further regulations of November 1ST 1943 abolished the SS runic decal and dictated that it was also to be removed from all helmets although the directives were not completely adhered to. Of Note: The SS runic decal underwent a minor modification sometime early in the war with the runes being somewhat less angular.

PHYSICAL DESCRIPTION: The stamped, sheet steel construction helmet retains about 70% of its age and usage darkened, slightly rough textured, field-grey over-paint with numerous small spots of wear to the base metal with light to moderate surface spotting. The right side of the helmet has an "SS" runic decal with black, angular runes on a silver shield shaped base with a narrow black bordered edging. Most of the runic decal has chafed off with only about 25% remaining. The left side of the helmet has the NSDAP party shield decal with a black canted swastika on a white circular field with a red shield shaped base with narrow black outer border edging. The party shield decal is retained about 75% with numerous small scrapes and scuffs. All three liner retaining rivets are intact. The interior of the helmet has an age and usage darkened, M31 tan leather liner fully intact with all eight fingers and the original tie string. The liner shows light to moderate chafe wear to the bottom edge, moderate to heavy age and usage toning and some light surface cracking. The liner has a faint, handwritten owner’s name and an illegible size inkstamp. The interior, reverse, neck guard apron has a faint, mostly illegible, stamped serial number and the interior left side apron is stamped with the faint, manufacturer’s code and size that appears to be, "Q64" indicating manufacture by F.W. Quist, G.m.b.H. Esslingen, size 64. The helmet comes complete with a blackened leather chinstrap with a pronged, natural aluminum length adjustment buckle and natural steel and alloy retaining studs all intact. The chinstrap shows light to moderate chafe wear and age and usage toning and an unusual "bite" near the buckle end. The reverse of the chinstrap is well marked with the faint, impressed manufacturer’s mark that appears to be, "O. Vogel Chemnitz 1940".

GRADE ***1/4                             PRICE $8,330.00

To Order this item, please use one of the two e-mail addresses below to contact us. Please make sure to quote the item number in your e-mail

MILITARIA WANTED!  If you have items for sale, please contact us. We specialize in selling single pieces and entire collections. Over 3 decades in the business and we do all the work for you. Get the best return for your investment.

-E-Mail Address pawmac@nbnet.nb.ca  Or  guild@nb.aibn.com

To return to the main page please CLICK below

HOME (CLICK HERE)